Keep your machines. We make them intelligent.

01What you already run

Start with what is already on site.

Visual to add

A CCTV camera on a pole above a gate or a haul road.

Site cameras

With Kalon · Who enters an exclusion zone, and for how long.

A pit seen from a drone.

Drones

With Kalon · Every person and vehicle on the ground, tracked from above.

A haul truck on a site road.

Haul trucks and site vehicles

With Kalon · A stop sent the moment a worker gets too close.

A telecom mast against the sky.

Telecom towers

With Kalon · Power, outages and generator faults, reported from the mast.

Visual to add

A ground robot or rover on site, its camera view beside it.

Ground robots

With Kalon · Where people are, and when to halt.

Visual to add

A weather station or gas monitor mounted on site.

Gas and weather sensors

With Kalon · Readings turned into a warning before the hazard arrives.

02Before and after

Same camera. New intelligence.

Drag across one frame of ordinary drone footage. On the right, every vehicle Kalon found, boxed in 3D and followed.

Overhead footage of a road junction; every vehicle drawn as a tracked 3D box
Your footageWith Kalon
model output · the same frame, before and after

03How we connect it

We do the connecting.

  1. Visual to add

    A Magnon engineer on site with a tablet, noting the cameras on a mast.

    01

    Survey

    We walk your site and list every camera, machine and sensor you run.

  2. Visual to add

    An engineer wiring a connection box at the foot of a camera pole, or into a vehicle's controls.

    02

    Connect

    We connect your feeds to Kalon. Where a machine should stop on an alert, we wire the stop into its controls.

  3. Visual to add

    Your site's footage in KalonOS, its alerts being checked one by one.

    03

    Tune

    Kalon is tested on your own footage before it raises a live alert.

  4. KalonOS on a control-room screen.

    04

    Run

    Live, watched and supported by us. You see every site in KalonOS.

04Where it runs

Kalon runs on our compute, or on yours.

The default

On Magnon's compute

Your cameras and sensors connect to Kalon running on our compute. Nothing to host or maintain on your side.

If you have it

On your own compute

Already run servers or edge hardware? We install Kalon there and connect it the same way, and your footage stays on your site.

05For engineering teams

One brain, any body.

Building your own machine? Kalon takes video and sensor feeds in and hands your controls a typed command: stop, halt, a route, return home. Our engineers work with yours on the rest.

Talk to our engineers
Kalonperceive · map · predict · decidevideo and sensors in · commands outwe wire each machine's controls hereDronesensors · controlsGround robotsensors · controlsVehiclesensors · controlsFixed mastsensors · controlsKinds of machine, for illustration

Magnon Industries

Tell us what you already run.

Cameras, drones, vehicles, sensors: list them, and we will tell you what Kalon adds and how we would connect it.